Information
Mainoffice UP
GmbH
Dr. Silke Schweighoefer, CEO
Bockradener Strasse 52b
49477 Ibbenbüren
Tel: 05451/505-222
Fax: 05451/505-333
e-mail:
s.schweighoefer [at] upgmbh [dot] com
Internet:
www.upgmbh.com
www.apfelreifetest.de
www.sapflow.com
Register of companies:
HRB Steinfurt 6800
USt.ID/VAT No: DE 811536447
Office Cottbus
Dipl.-Ing. (FH) Gerhard Kast, CEO
e-mail: g.kast [at] upgmbh [dot] com
Taubenstrasse 4
03046 Cottbus
Tel: 0355/48554-0
Fax: 0355/4855415
Sapflow-Measurement - Accessories
Datahog-cable to ccs2, 4x0.25mm², with Binder 5pol plug for the connection of sapflow-sensors to a Skye-Datahog-Datalogger.
blindplug for elongation cable Binder M8 4pol incl. soldered bridge for heating and signal. Attention: plugs are only weatherproof (IP67) when connected.
logger+battery cable to ccs2 8x0.25mm², 2m, PUR ready-to-go
Constant-Current-Source ccs2 for Type M sensors 84mA, Uv=12-18V, for maximum 3 sensors
elongationcable 5m for saplowsensors with Binder M8 socket ready-to-go to connect to ccs2 ; other lenghts in 5m steps are available. Max. cable-length 20m!
Supplementkit 1 including: 10 alutubes, 100g silikongrease incl. Fillingtip, chisel and wire brush, insertion tool for alutubes, 2 special drillers 2.1 mm
Protection Shield for sapflowsensor: aluminiumcoated styropor (about 60x40cm), strengthened with wire grating to protect against direct sunlight and rain - please order Terostat seperately to seal the protection cup to the tree